Modeling and Simulink of Transient Performance Evaluation of RCAT and VCAT Cell Structures
Implementation plan:
*************************
Scenario 1 : (Using RCAT)
****************************
Step 1: Initially , we designed a 3D model of RCAT transistor with gate length, oxide thickness and channel dimensions.
Step 2: Then, we simulate and collect RCAT data such as threshold voltage, drain current (Id), and gate voltage (Vg).
Step 3: Next, we generate Id-Vg and Id-Vd characteristics values for RCAT structure using analytical expressions method based on collected data.
Step 4: Next, we detect Id-Vg, Id-Vd curves ranges for RCAT transistors using identical biasing conditions.
Step 5: Next, we Analyze the impact of geometry variations on current drive and leakage using parametric sweeps.
Step 6: Finally, we plot performance for the following metrics:
6.1 : Time Vs Drain Current (A)
6.2 : Time Vs Gate Voltage (V)
6.3 : Time Vs Power Dissipation (W)
Scenario 2: (Using VCAT)
****************************
Step 1: Initially , we design a 3D model of a VCAT transistor with gate length, oxide thickness and channel dimensions.
Step 2: Then, we simulate and collect VCAT data such as threshold voltage, drain current (Id), and gate voltage (Vg).
Step 3: Next, we generate Id-Vg and Id-Vd characteristics values for VCAT structure using analytical expressions method based on collected data.
Step 4: Next, we detect Id-Vg, Id-Vd curves ranges for VCAT transistors using identical biasing conditions.
Step 5: Next, we Analyze the impact of geometry variations on current drive and leakage using parametric sweeps.
Step 6: Finally, we plot performance for the following metrics:
6.1 : Time Vs Drain Current (A)
6.2 : Time Vs Gate Voltage (V)
6.3 : Time Vs Power Dissipation (W)
Software Requirements:
***************************
1. Development Tool: Matlab-R2023a or above
2. Operating System: Windows 10 (64-bit) or above
Note
******
1) If the plan does not meet your requirements, provide detailed steps, parameters, models, or expected results in advance. Once implemented, changes won’t be possible without prior input; otherwise, we’ll proceed as per our implementation plan.
2) If the plan satisfies your requirement, Please confirm with us.
3) Project based on Simulation only, not a real time project.
4) Please understand that any modifications made to the confirmed implementation plan will not be made after the project development.
