Modeling and Simulink of Reactive Power Compensation for Offshore Wind Farms with HVDC
Implementation Plan:
*************************
Step 1: Initially, we constructed the HVAC transmission system Simulink model with a wind farm .
Step 2: Then, we simulate the model and collect voltage, current, and power flow data of the transmission system.
Step 3: Next, we analyze reactive power distribution along the cable under wind speed operating conditions.
Step 4: Next, we evaluate the effect of mid-cable reactor placement on reducing reactive power and transmission losses.
Step 5: Next, we validate the cost-effectiveness of an optimized HVAC transmission system with HVDC transmission mechanism using OWPP capacities.
Step 6: Finally, we plot performance for the following metrics:
6.1 : Time Vs Current (p.u)
6.2 : Time Vs Voltage (p.u)
6.3 : Time Vs Reactive Power(p.u)
6.4 : Time Vs Active Power(p.u)
Software Requirements:
***************************
1. Development Tool: Matlab-R2023a/Simulink or above
2. Operating System: Windows 10 (64-bit) or above
Note
******
1) If the plan does not meet your requirements, provide detailed steps, parameters, models, or expected results in advance. Once implemented, changes won’t be possible without prior input; otherwise, we’ll proceed as per our implementation plan.
2) If the plan satisfies your requirement, Please confirm with us.
3) Project based on Simulation only, not a real time project.
4) Please understand that any modifications made to the confirmed implementation plan will not be made after the project
